Does Florida allow 3D printed homes?

Yes. Florida allows 3D printed concrete homes, and the permitting pathway is established. The wall system used by Coastal Monolithic has been evaluated by the International Code Council Evaluation Service (ICC-ES), which provides an independent code compliance pathway accepted in Florida and multiple other US jurisdictions. The Florida Building Code does not prohibit concrete additive construction. Projects are permitted on a site-by-site basis through the standard local building department process, using the ICC-ES evaluation as the technical basis for approval.

Are 3D printed homes allowed in Florida?

Yes. 3D printed concrete homes are permitted in Florida. The key is the permitting pathway: the technology must have an independent code evaluation that local building departments can reference. The platform Coastal Monolithic uses carries an ICC-ES evaluation, which is the standard mechanism for approving alternative construction methods under the Florida Building Code. We have an established permitting pathway in Southwest Florida and work through the standard local approval process.

Can you get a mortgage for a 3D printed house?

Mortgage financing for 3D printed homes is an evolving area. Conventional mortgage approval depends on the lender's appraisal process and the appraiser's ability to find comparable sales. As 3D printed homes become more common in a market, comparables become easier to establish. FHA and VA loans have specific property standards that a properly permitted, code-compliant concrete home can meet. The most straightforward path today is working with lenders who have experience with alternative construction or non-traditional building methods. We recommend discussing financing early in the process.

Can you get a mortgage on a 3D house?

Yes, though it requires working with the right lender. A 3D printed concrete home that is properly permitted, code-compliant, and appraised is a real property like any other. The challenge is that appraisers and lenders are still developing familiarity with the product. Portfolio lenders, construction lenders, and some regional banks are more flexible than large conventional lenders. As more 3D printed homes are completed and sold in Florida, the financing process will become more straightforward.

How long will a 3D printed house last?

A properly constructed 3D printed concrete home is expected to last as long as any high-quality concrete structure, which is measured in generations, not decades. Concrete does not rot, warp, or provide a pathway for termites. The 7,000+ PSI concrete mix used in the Coastal Monolithic wall system is formulated for coastal Florida conditions: salt air, humidity, and storm exposure. The monolithic, jointless construction eliminates the failure points that cause conventional homes to deteriorate. Concrete structures built in the mid-20th century are still standing across Florida.

How long do 3D printed homes last?

The expected service life of a 3D printed concrete home is comparable to any quality concrete structure: well over 50 to 100 years with normal maintenance. The material itself does not have an inherent expiration. The Coastal Monolithic wall system uses a 7,000+ PSI mix designed for coastal Florida conditions. The monolithic construction eliminates joints and seams, which are the primary failure points in conventional construction. There is no wood to rot, no termite pathway, and no mortar joint to crack.

Do 3D printed homes crack?

All concrete can develop minor surface cracks over time, particularly hairline cracks from thermal expansion and contraction. This is normal for concrete and does not indicate structural failure. The monolithic, jointless construction method used by Coastal Monolithic eliminates the most common crack initiation points in conventional construction: mortar joints, framing connections, and material transitions. The 7,000+ PSI high-strength mix is more resistant to cracking than standard concrete. Structural cracking in a properly designed and constructed concrete home is rare.

Are 3D printed homes mold proof?

Concrete itself does not support mold growth the way wood does. Mold requires an organic food source, and concrete does not provide one. The PHIUS Certified envelope used in the Coastal Monolithic wall system is designed to control moisture infiltration and vapor movement, which is the primary driver of mold in Florida homes. A properly designed and constructed concrete home with a high-performance envelope is significantly more resistant to mold than wood-frame construction.

What is the best house design to withstand a hurricane?

The most hurricane-resistant residential structures share several characteristics: monolithic construction with no joints or seams, high-strength materials, a continuous load path from roof to foundation, and minimal openings in the wall system. The Coastal Monolithic wall system is rated to 250 mph wind loads under FEMA P-361 (the federal storm shelter standard), which is the highest residential wind resistance rating available. Wood-frame construction, even with hurricane straps and impact windows, cannot achieve this rating. The monolithic concrete wall has no joints to fail, no wood to fracture, and no mortar to dislodge.

What is the biggest problem with 3D printing in construction?

The most significant challenges in 3D printed construction are permitting, financing, and market familiarity, not the technology itself. The technology is proven: the platform Coastal Monolithic uses has delivered 175+ structures across North America, including residential, military, and international deployments. The practical challenges are: (1) Permitting requires an ICC-ES evaluation or equivalent code pathway. (2) Appraisers and lenders are still developing familiarity with the product. (3) The construction industry is conservative, and adoption takes time. Coastal Monolithic has addressed the permitting challenge through the ICC-ES evaluated platform.

Do 3D printed homes need insulation?

The Coastal Monolithic wall system is designed with integrated insulation as part of the printed wall assembly. The PHIUS Certified envelope meets one of the highest thermal performance standards in US residential construction, which means the insulation requirement is addressed within the wall system itself. You do not need to add a separate insulation layer the way you would with wood-frame construction. The result is near-zero energy operating costs for occupants.

Do 3D printed houses have drywall?

Yes. The 3D printed concrete shell provides the structural wall system, not the finished interior surface. Interior finishes, including drywall, are applied after the shell is complete, the same way they are in any construction method. The concrete wall serves as the structural substrate. Interior trades, including drywall, flooring, cabinetry, and finishes, proceed normally after the shell is enclosed.

How much does a 3D printed house cost in Florida?

The cost of a 3D printed home in Florida depends on size, design complexity, site conditions, and finish level. The structural shell cost is competitive with conventional construction when you account for the trades it replaces: framing, insulation, sheathing, vapor barrier, and stucco are all consolidated into one automated pass. The value proposition is not necessarily a lower sticker price, but a faster build cycle, fewer subs to coordinate, and a structurally superior product. For a specific project, reach out directly at coastalmonolithic.com/contact.

How much is a 3D printed house of 2000 square feet?

A 2,000 square foot 3D printed concrete home in Southwest Florida will vary in total cost depending on design, site conditions, finish level, and current material and labor costs. The structural shell, which is what Coastal Monolithic delivers, replaces five exterior trades in one automated pass. The total project cost, including foundation, MEP, roofing, windows, doors, and interior finishes, is in the range of a well-built conventional home of similar size. Contact Coastal Monolithic directly for a project-specific number.

How much does it cost to 3D print a 2000 sq ft house?

The cost to 3D print the structural shell of a 2,000 sq ft home is one component of the total project cost. The shell replaces framing, insulation, sheathing, vapor barrier, and stucco, so the comparison is shell cost versus the combined cost of those five trades. When evaluated on that basis, the cost is competitive. Total project cost for a 2,000 sq ft home in Southwest Florida depends on your specific design and site. Contact Coastal Monolithic directly for a project-specific conversation.

How much is insurance on a $500,000 house in Florida?

Florida homeowner insurance is the most expensive in the nation, averaging over $7,100 per year. For a $500,000 home, annual premiums vary significantly based on construction type, location, wind mitigation features, and the insurer. Concrete construction, particularly a FEMA Storm Shelter Rated structure, typically qualifies for meaningful wind mitigation credits that reduce premiums. The PHIUS Certified, FEMA Storm Shelter Rated wall system used by Coastal Monolithic is designed to qualify for the strongest available wind mitigation credits under Florida's insurance rating system.

What is the downside of a 3D printed house?

The honest answer: the primary downsides today are market familiarity, not structural performance. (1) Financing: lenders and appraisers are still developing familiarity with the product. (2) Design constraints: very complex curved geometries require more lead time in the print preparation phase. (3) Interior finish trades: the concrete shell requires the same interior trades as any home. (4) Market comparables: in markets where few 3D printed homes have sold, appraisers have limited comparable data. These are real considerations, not dealbreakers. The structural, durability, and performance advantages of a PHIUS Certified, FEMA Storm Shelter Rated concrete shell are significant and well-documented.

What are the disadvantages of a 3D printed house?

The main disadvantages of 3D printed homes today are practical and market-related, not structural. (1) Financing is more complex than for a conventional home. (2) The resale market is still developing. (3) Not all 3D printing companies have the permitting pathway established. Coastal Monolithic uses an ICC-ES evaluated platform, which addresses this. (4) Interior finishes still require the same trades as any home. On the structural side, concrete is heavier than wood, which affects foundation design, and very complex geometries require more print preparation time.

What wind speed can a 3D printed concrete home withstand?

The Coastal Monolithic wall system is rated to 250 mph wind loads under FEMA P-361, the federal storm shelter standard. That is the highest residential wind resistance rating available in the United States. For context, a Category 5 hurricane produces sustained winds of 157 mph or higher. The 250 mph rating exceeds the worst-case scenario for any hurricane on record making landfall in Florida. Wood-frame construction, even with hurricane straps, impact-rated windows, and full Florida Building Code compliance, cannot achieve a FEMA Storm Shelter Rating.

Will a 3D printed home lower my homeowner insurance in Florida?

Concrete construction with documented wind mitigation credentials typically qualifies for significant premium reductions under Florida's insurance rating system. Florida law requires insurers to offer wind mitigation discounts based on construction type, roof shape, roof covering, roof deck attachment, roof-to-wall connection, and opening protection. A FEMA Storm Shelter Rated, monolithic concrete wall system is the strongest possible construction type for wind mitigation purposes. The actual discount depends on your insurer, your specific home design, and a licensed wind mitigation inspection.

Can a 3D printed home be built in a Florida HVHZ (High Velocity Hurricane Zone)?

Yes. The wall system used by Coastal Monolithic carries Florida Building Code High Velocity Hurricane Zone (HVHZ) compliance as part of its certification package. The HVHZ designation applies to Miami-Dade and Broward counties, which have the most stringent wind resistance requirements in the Florida Building Code. The ICC-ES evaluation and the FEMA Storm Shelter Rating both support compliance with HVHZ requirements.

How does 3D printed concrete construction compare to ICF (Insulated Concrete Forms) in Florida?

Both 3D printed concrete and ICF are concrete-based construction methods that outperform wood-frame in Florida's hurricane and insurance environment. ICF uses pre-formed foam blocks filled with poured concrete, which requires formwork assembly, rebar placement, and a concrete pour. 3D printed concrete is a single automated pass: the robotic system prints the full wall system directly, replacing framing, insulation, sheathing, vapor barrier, and stucco in one operation. The 3DCP wall system also carries PHIUS Passive House Certification, which is a higher thermal performance standard than most ICF systems achieve.

How fast can you build a 3D printed house?

The structural shell of a single-family home can be printed in a matter of days, not weeks. The robotic system prints the full wall system in one continuous automated pass, which replaces framing, insulation, sheathing, vapor barrier, and stucco in conventional construction. That five-trade sequence typically takes weeks in a wood-frame build. The 3DCP pass compresses it dramatically. For the Coastal Monolithic pilot project, the first project is shovel-ready with a 90-day construction start window.

What is the fastest 3D printing method for construction?

For large-format residential construction, the fastest method is large-scale robotic concrete extrusion, which is the technology Coastal Monolithic uses. The system prints the full structural wall system in a single continuous pass directly on site. There is no factory prefabrication, no panel assembly, and no multi-trade sequencing for the wall system. This is faster than prefabricated panel systems and significantly faster than conventional multi-trade construction.

Are 3D printed houses stronger than normal houses?

Yes, in the ways that matter most for Florida. The Coastal Monolithic wall system uses a 7,000+ PSI concrete mix, which is significantly stronger than the standard 3,000 to 4,000 PSI concrete used in conventional foundations, and far stronger than wood framing. The monolithic, jointless construction means there are no mortar joints, no framing connections, and no material transitions where failure typically initiates. The wall system is rated to 250 mph wind loads under FEMA P-361. Concrete does not rot, warp, or provide a termite pathway.

Are 3D printed houses cheaper than regular houses?

The honest answer is: it depends on what you are comparing and how you account for the full cost picture. The structural shell cost is competitive with conventional construction when you account for the five trades it replaces. Where 3D printed homes deliver clear long-term cost advantages: (1) Insurance savings from wind mitigation credits on a FEMA Storm Shelter Rated structure can be substantial in Florida. (2) Energy costs are significantly lower with a PHIUS Certified envelope. (3) Maintenance costs are lower with no wood to rot, no termite treatment, and no stucco seams to reseal.

What are the benefits of a 3D printed house?

For Southwest Florida specifically, the benefits are direct and measurable. (1) Hurricane resistance: the FEMA Storm Shelter Rated wall system is rated to 250 mph wind loads. (2) Insurance savings: concrete construction with wind mitigation certification qualifies for significant premium reductions. (3) Energy efficiency: the PHIUS Certified envelope delivers near-zero energy operating costs. (4) Speed: one automated pass replaces five exterior trades. (5) Durability: no wood to rot, no termite pathway, no mortar joints to crack. (6) Labor efficiency: fewer subs to coordinate means fewer scheduling conflicts.

How does the builder subcontracting process work with Coastal Monolithic?

Coastal Monolithic delivers the structural shell. Your existing subcontractor relationships handle everything after the shell is enclosed. Coastal Monolithic mobilizes the robotic printing system, batches and delivers the concrete mix, prints the full wall system, and provides the certification documentation package. From that point, the builder's MEP, roofing, window, door, and interior finish subs take over exactly as they would on any concrete construction project. There is no proprietary subcontractor network you are required to use.

Do I need special subcontractors to finish a 3D printed concrete home?

No. The interior and exterior finish trades for a 3D printed concrete home are the same trades used in any concrete construction project. Electricians, plumbers, HVAC contractors, roofers, window installers, drywall crews, and finish carpenters all work the same way they would on a conventional concrete or ICF home. If your subs have worked on concrete construction before, they can work on a 3D printed shell.

Who handles MEP rough-in on a 3D printed home?

MEP (mechanical, electrical, plumbing) rough-in is handled by the builder's standard subcontractors, the same way it is on any concrete construction project. The key difference from wood-frame is that conduit runs, plumbing penetrations, and HVAC chases are planned during the design and print preparation phase, before the shell is printed. Penetrations and chases are incorporated into the print file so they are in the correct location when the shell is complete.

What happens after the shell is printed?

After the shell is printed and the curing verification is complete, the project transitions to standard construction sequencing: (1) Roofing system installation. (2) Window and door installation. (3) MEP rough-in: electrical, plumbing, and HVAC. (4) Insulation of any non-printed cavities, if applicable. (5) Drywall and interior finishes. (6) Cabinetry, flooring, and fixture installation. (7) Final inspections and certificate of occupancy. Coastal Monolithic provides the certification documentation package to support the permitting and inspection process throughout.

What does the inside of a 3D printed home look like?

The interior of a 3D printed concrete home looks like any well-finished concrete or ICF home. The printed concrete wall is the structural system, not the finished interior surface. Drywall is applied to the interior face of the concrete wall, the same way it is applied to any concrete or masonry wall. Interior finishes, including flooring, cabinetry, trim, and paint, are applied normally. The result is a finished interior that is indistinguishable from a conventionally built home.

Can you run electrical and plumbing through a 3D printed concrete wall?

Yes. Electrical conduit, plumbing penetrations, and HVAC chases are planned during the design phase and incorporated into the print file before construction begins. The robotic system can accommodate planned penetrations and chases in the wall system. Post-print, electricians and plumbers work the same way they would on any concrete construction project. The key is that MEP layout must be coordinated during the design phase, before the print file is finalized.

Can you add a second story to a 3D printed home?

Multi-story 3D printed concrete construction is technically feasible and has been demonstrated on projects globally. The structural capacity of the 7,000+ PSI concrete wall system supports multi-story loads. Single-story construction is the current focus for the Coastal Monolithic pilot and Innovation Enclave projects in Southwest Florida. Multi-story designs are a conversation for specific projects. Reach out directly for a straight answer on feasibility.

What is the Innovation Enclave?

The Innovation Enclave is Phase 2 of the Coastal Monolithic platform: a 20 to 25 unit PHIUS Certified, FEMA Storm Shelter Rated residential cluster in Southwest Florida targeted for 2026 delivery. Builder partnership conversations are active now. Site selection is underway in Q1 2026.

What are the site requirements for the Innovation Enclave?

Site requirements for a potential Enclave location include: (1) Location in Lee, Collier, Charlotte, or Sarasota County. (2) Sufficient acreage to support 20 to 25 residential units. (3) Zoning that permits residential development at the target density. (4) Access to utilities: water, sewer or septic, and electrical service. (5) Site conditions that support the robotic printing system. (6) No deed restrictions that prohibit concrete or non-traditional construction methods.

How does the Innovation Enclave builder partnership work?

Coastal Monolithic delivers the printed concrete shells for all units in the cluster. The builder partner handles MEP, roofing, windows, doors, and interior finishes for each unit, using their existing subcontractor relationships. The builder brings local market knowledge, subcontractor relationships, and construction management capacity. Coastal Monolithic brings the printing platform, certification documentation, and permitting support.

What is the timeline for the Innovation Enclave?

The Innovation Enclave is targeted for 2026 delivery. The pilot project, a single-family spec home of approximately 1,850 square feet, is the proving ground for the permitting pathway, construction workflow, cost structure, and market demand. The pilot is shovel-ready with a 90-day construction start window. Builder and developer partnerships for the Enclave are open now.

Who builds 3D printed concrete homes in Southwest Florida?

Coastal Monolithic LLC is developing a 3D printed concrete home construction platform in Southwest Florida, serving Cape Coral, Fort Myers, Naples, Bonita Springs, Lee County, and Collier County. Using proven large-scale additive concrete construction technology, Coastal Monolithic is the first company focused on deploying this method specifically for the hurricane-exposed Florida coastal market.

How hurricane-resistant are 3D printed concrete homes in Florida?

Coastal Monolithic wall systems are rated to withstand 250 mph wind loads, significantly exceeding Florida Building Code requirements for hurricane-zone construction. The monolithic concrete structure eliminates the weakest point of traditional homes: wood framing connections. Concrete is also inherently water-resistant, reducing flood damage common in coastal Florida storms. The wall system is ICC-ES evaluated and fire-rated.

What areas of Florida does Coastal Monolithic serve?

Coastal Monolithic is initially focused on Southwest Florida, including Cape Coral, Fort Myers, Naples, Bonita Springs, Estero, Marco Island, Port Charlotte, and surrounding Lee County, Collier County, and Charlotte County communities. The pilot project is in Southwest Florida, with planned expansion across the broader Florida coastal market following pilot validation.

Is Coastal Monolithic accepting investors?

Yes. Coastal Monolithic is raising an early-stage round to fund its Southwest Florida pilot project. Qualified investors can request the investor overview at coastalmonolithic.com/investors or contact jack@coastalmonolithic.com directly.

What certifications do Coastal Monolithic 3D printed concrete homes carry?

Every shell delivered by Coastal Monolithic carries four active certifications: PHIUS Passive House Certification (60 to 80% energy reduction vs. code minimum), a FEMA Storm Shelter Rating (FEMA P-361 compliance), ICC-ES evaluation (establishing permitting pathways across US jurisdictions), and full Florida Building Code compliance including High-Velocity Hurricane Zone provisions with a 2-hour fire resistance rating.

How does 3D printed concrete reduce construction waste?

Large-scale 3D concrete printing uses computer-controlled material deposition that places concrete only where it is needed, with no formwork to discard and no offcuts. Published comparative analyses suggest material waste can be reduced by approximately 62% compared to conventional framing methods.

Terms of Use | Coastal Monolithic

Please read these Terms of Use (“Terms”) carefully before using coastalmonolithic.com (the “Site”) operated by Coastal Monolithic LLC (“Coastal Monolithic,” “we,” “us,” or “our”). Your access to and use of the Site is conditioned on your acceptance of and compliance with these Terms. These Terms apply to all visitors, users, and others who access or use the Site.

1. Acceptance of Terms

By accessing or using the Site, you confirm that you are at least 18 years of age, have read and understood these Terms, and agree to be bound by them. If you do not agree to these Terms, please discontinue use of the Site immediately.

These Terms constitute a legally binding agreement between you and Coastal Monolithic LLC, a Florida limited liability company. Your continued use of the Site following any modifications to these Terms constitutes acceptance of those modifications.

2. Use of the Site

The Site is provided for informational purposes. You may browse the Site, read content, and submit inquiries through the provided contact forms. You agree to use the Site only for lawful purposes and in a manner that does not infringe the rights of others or restrict their use of the Site.

You agree not to:

Use the Site in any way that violates applicable federal, state, or local law or regulation
Transmit any unsolicited or unauthorized advertising or promotional material (spam)
Attempt to gain unauthorized access to any part of the Site, its servers, or any systems connected to the Site
Use automated means (bots, scrapers, crawlers) to access or collect data from the Site in a manner that burdens our infrastructure, except standard search engine indexing
Impersonate or misrepresent your affiliation with any person or entity
Introduce any virus, trojan, worm, or other harmful code to the Site
Use content from the Site to create competing materials without our express written permission

We reserve the right to terminate or restrict your access to the Site at any time, without notice, for any conduct we determine in our sole discretion to be in violation of these Terms or otherwise harmful to Coastal Monolithic, other users, or third parties.

3. Intellectual Property

The Site and all of its content, including but not limited to text, graphics, images, logos, photographs, data, software, and the selection and arrangement thereof, are the exclusive property of Coastal Monolithic LLC or its licensors and are protected by United States copyright, trademark, and other applicable intellectual property laws.

You are granted a limited, non-exclusive, non-transferable, revocable license to access and view the content on the Site for your personal, non-commercial informational use only. This license does not include the right to:

Copy, reproduce, distribute, publish, or transmit any Site content in any medium without prior written permission
Modify, create derivative works from, or reverse engineer any portion of the Site
Remove or alter any copyright, trademark, or other proprietary notices from Site content
Use any Coastal Monolithic trademarks, service marks, or logos without prior written consent

Any use of Site content beyond the scope of this license requires our express prior written consent. To request permission, contact us at jack@coastalmonolithic.com.

4. Investment Disclaimer

This is not an offer to sell securities. Nothing on this Site constitutes or should be construed as an offer to sell, a solicitation of an offer to buy, or a recommendation of any security or investment product. Information on this Site relating to investment opportunities, business plans, financial projections, market data, or potential returns is provided for informational and discussion purposes only.

Any investment in Coastal Monolithic LLC involves significant risk, including the possible loss of the entire amount invested. Past performance of similar companies, technologies, or markets is not indicative of future results. Forward-looking statements on this Site, including projections about market size, revenue, construction timelines, return potential, and development plans, are based on management’s current expectations and assumptions and are subject to risks and uncertainties that could cause actual results to differ materially.

No information on this Site should be relied upon as investment, legal, tax, or financial advice. Prospective investors should consult with their own qualified financial, legal, and tax advisors before making any investment decision. All securities offerings by Coastal Monolithic LLC, if any, will be made only through formal offering documents provided to qualified investors in compliance with applicable securities laws.

By accessing the investor-related sections of this Site, you acknowledge and agree that you are not relying on any information on this Site as the sole basis for any investment decision.

5. No Warranties

THE SITE AND ALL CONTENT, INFORMATION, AND MATERIALS PROVIDED ON OR THROUGH THE SITE ARE PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS WITHOUT ANY WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR COURSE OF PERFORMANCE.

Coastal Monolithic LLC does not warrant that: (a) the Site will be available at all times or operate without interruption or errors; (b) the information on the Site is accurate, complete, current, or reliable; (c) any defects or errors in the Site will be corrected; or (d) the Site or its servers are free of viruses or other harmful components.

You acknowledge that your use of the Site is at your sole risk. Some jurisdictions do not allow the exclusion of implied warranties, so some of the above exclusions may not apply to you.

6. Limitation of Liability

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL COASTAL MONOLITHIC LLC, ITS OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, OR LICENSORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, LOSS OF DATA, LOSS OF GOODWILL, BUSINESS INTERRUPTION, OR COST OF SUBSTITUTE GOODS OR SERVICES, ARISING OUT OF OR IN CONNECTION WITH YOUR USE OF OR INABILITY TO USE THE SITE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

In no event shall the total liability of Coastal Monolithic LLC to you for all claims arising from your use of the Site exceed one hundred U.S. dollars ($100.00).

Some jurisdictions do not allow the exclusion or limitation of liability for certain damages, so some of the above limitations may not apply to you. In those jurisdictions, Coastal Monolithic LLC’s liability is limited to the greatest extent permitted by law.

7. Indemnification

You agree to defend, indemnify, and hold harmless Coastal Monolithic LLC and its officers, directors, employees, agents, and licensors from and against any claims, liabilities, damages, judgments, awards, losses, costs, expenses, or fees (including reasonable attorneys’ fees) arising out of or relating to: (a) your violation of these Terms; (b) your use of the Site in a manner not authorized by these Terms; (c) your violation of any third-party right, including any intellectual property right or privacy right; or (d) any claim that your use of the Site caused damage to a third party.

8. Third-Party Links

The Site may contain links to third-party websites or services that are not owned or controlled by Coastal Monolithic LLC. We have no control over and assume no responsibility for the content, privacy policies, or practices of any third-party websites or services.

We do not endorse any third-party websites or services linked from this Site. You acknowledge and agree that Coastal Monolithic LLC shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such content, goods, or services available on or through any such websites or services.

We strongly advise you to read the terms and conditions and privacy policies of any third-party websites you visit.

9. Governing Law

These Terms shall be governed by and construed in accordance with the laws of the State of Florida, United States of America, without regard to its conflict of law provisions.

Any dispute arising out of or relating to these Terms or your use of the Site shall be subject to the exclusive jurisdiction of the state and federal courts located in Charlotte County or Lee County, Florida. By using the Site, you consent to the personal jurisdiction of such courts and waive any objection to the laying of venue in such courts.

If any provision of these Terms is held to be invalid, illegal, or unenforceable, the remaining provisions shall continue in full force and effect.

10. Changes to These Terms

We reserve the right to modify or replace these Terms at any time at our sole discretion. When we make material changes, we will update the “Last modified” date at the top of this page.

It is your responsibility to review these Terms periodically for changes. Your continued use of the Site after any changes are posted constitutes your acceptance of the new Terms. If you do not agree to the revised Terms, you should stop using the Site.

11. Contact Us

If you have any questions about these Terms of Use, please contact us:

Coastal Monolithic LLC
Southwest Florida
Email: jack@coastalmonolithic.com

Back to Home Privacy Policy Contact Us

Terms of Use